Khadi & Village Industries Board

ANNEXURE

Specified items of Haryana Khadi & Village Industries Board.

1. COTTON KHADI

i) Dusters
ii) Bastas
iii) Towels
iv) White Khadi
v) Overall (Dungarees)
vi) Khadi Dhoti
vii) Durees, curtain Cloth, Bed Sheets, Mattresses & Pillows
viii) Tat Patti
ix) Blankets
x) Cotton Khadi

2.WOOLEN KHADI

i) Toilet Soap & Detergents
ii) Shoes, Chappals etc.
iii) Wooden, Steel, Cane & Bamboo furniture
iv) Shutters, Grills, Gates etc.
v) Buckets, Nails & Rivets.
vi) Edible oils.
vii) Red Clay.
viii) String, Ropes, Ban
ix) Baskets and sikki Murah
x) Steel Trunk
xi) Taslas.

HARYANA KHADI & VILLAGE INDUSTRIES BOARD SCO 841, KALKA ROAD, MANIMAJRA, CHANDIGARH-160101 (Fax-0172-736561, Ph. No. PBX-0172-733268)

Sr.No.
HandMade Paper Items Approved (Rs.)
Qty.
Rates
i)
Flying cover coloured in light/dull shade with two eyelete at corner 14″x18″, 40 Kg. (1000 Nos.)
1000 Nos. 1600/-
ii).
File cover 14″x19″ natural colour, 55 Kg, Pasted 3″ width cloth piece in middle (1000 nos.)
1000 Nos. 2350/-
iii)
File cover ribes fited 4 eyeleted 14½”x19½”, 60 kg. natural colour (1000 nos.)
1000 Nos. 2530/-
iv) File cover ribes fited 4 eyeleted 14½”x19½”, 60 kg. Dull colour (1000 nos.) 1000 Nos. 2750/-
v)
Flying Cover/ file cover with cover paper natural colour 18½”x28″ (200 GSM) 33.4 Kg. (per M. Tonn)
Per M. Tonn. 24750/-
vi) File cover 6 eyeleted 14½”x19½”, 80 Kg. natural colour (1000 Nos.) 1000 Nos. 2750/-
vii) File cover 4 eyelet 14½”x19½”, 60 Kg. Natural Colour. (1000 Nos.) 1000 Nos. 2040/-
viii) File cover 4 eyeleted 14½”x19½”,60 kg. Dull/ Natural Colour (1000 Nos.) 1000 Nos. 2200/-
ix) File cover 6 eyeleted 14½”x19½”, 60 kg. Bright Colour (1000 Nos.) 1000 Nos 3000/-
Sr.No.
Drawing Paper
Qty.
Rates
i) Ordinary 22″x30″, 40 kg. per ream in rough medium & smooth finish (per Ream) Ream 1700/-
ii). Ordinary 22″x30″,40 kg. per ream in mat finish (per ream) Ream . 1800/-
iii) File cover ribes fited 4 eyeleted 14½”x19½”, 60 kg. natural colour (1000 nos.) Ream 1800/-
iv) File cover ribes fited 4 eyeleted 14½”x19½”, 60 kg. Dull colour (1000 nos.) Ream 1390/-
v)
Flying Cover/ file cover with cover paper natural colour18½”x28″ (200 GSM) 33.4 Kg.
(per M. Tonn)
Ream 1350/-
Sr.No.
Pulp Board
Qty.
Rates
i) White Pulp Board 22″x30″, 55 kg. (per ream) Ream 2150/-
ii). Coloured pulp Board 22″x28″, 53.47 kg. Ream . 2150/-
iii) Cover paper/pulp Board dull colour 24″x35″,35.2 kg. (per ream) Ream 2000/-
Sr.No.
Degree Diploma Paper
Qty.
Rates
i) Snow white 22″x30″, 35 kg. per Ream in felt finish or linen finish. Ream 1500/-

TERMS & CONDITIONS

i) The new rates would be applicable on all order received by the Board i.e.f. 1.08.2001.
ii) The rates are valid upto 30.07.2002.
iii) The rates are F.O.R. destination in Haryana, Chandigarh and Delhi inclusive of 5% service charges of the Board.
iv) The rates are exclusive of ST & SC etc., which would be charged extra as may be applicable at the time of delivery.
v) +-2% variation would be admissible in the above specification (wt. & size etc.)

PART-B: WOODEN FURNITURE

Sr.No. Name of items SPECIFICATIONS Rate (Rs. Each)
1.(a) WOODEN TABLE
24″X24″X24″
(610X610X610MM)
Frame made of hard wood of size 3″x1″. Legs 2″x2″ with lower Khurji 2″x1″ and footrest 2″x1″. Top made of 12mm commercial ply with sunmica & beading. 378/-
1.(b) WOODEN TABLE
36″X24″X30″
(914X610X762MM
Withone Drawer of size 4″x15″x18″ (HxWxD) other specifications as per Sr. No. 1(a). 450/-
2. OFFICE WOODEN TABLE
48″X30″X30″
(1219X762X762MM)
Frame made of Hard wood. Sunmica fixed on 18mm commercial Board with beading for top. Upper Khurji 3″x1″. Legs 2″x2″ and lower Khurji 2″x1″.  Two drawers (one each side) of size 18″x12″4″ having bottom of 4mm thick commercial ply and kail wood sides of 12mmthickness. Spirit polished. 1280/-
3. OFFICE WOODEN TABLE
60″X36″X30″
(1524X914X762MM)
Frame made of Hard wood. Sunmica fixed on 18mm commercial board with beading for top. Upper Khurji 3″x1″ lower Khurji 2″x1″. One side box with 3 drawers or one drawer & cup board of over all size of box 27″x14″x18″. Other side supported by two legs of size 2″x2″. Drawers frame made of 12mm commercial ply of kail wood and bottom of drawers made of 4mm commercial ply. All sides of box covered with commercial ply of 4mm. Spirit polished. 2100/-
4. OFFICE WOODEN TABLE
72″X48″X30″
(1829X1219X762MM)
Frame made of hard wood. Sunmica fixed on 18mm commercial Board with beading for top. Legs 2 ½”x. 2 ½” Upper Khurji 3″x1″. Lower Khurji 2″x1″, boxes of size 21″x14″x18″ on both sides.
Box on left side with one drawer & cup-board.  Box on right side with 3 drawers made of 12mm commercial ply or kail wood. Bottom of drawers made of 4mm commercial ply. Otherside of drawers boxes & front of table covered with 4mm commercial ply having supports & should be spirit polished.
2630/-
5. LABORATORY TABLE
72″X36″X36″

(1829X914X914MM)
 
Frame made of hard wood . Legs 3″x3″ upper Khurji 4″x11/2, legs inter connected length-wise & widthwise with ¾” wood. Top made of ¾” partial wood with beading. Spirit polished. 2150/-
6. LABORATORY TABLE
72″X48″X36″
(1829X1219X914MM)
Specification as per Sr.No.5. 2500/-
7. LABORATORY TABLE
120″X60″X36″
(3081X1524X914MM)
Specification as per Sr. No.5, but with six legs. 3400/-
8. WOODEN CHAIR (with arms)
(Standard size)
Made of hard wood. Upper Khurji 3″x1″. Arms of size 2¼”x1″. Seat and back canned of good quality. Legs size 1½”x1½”.  Three sides rules of 1″x1″ spirit polished. 325/-
9. CHAIR HARD WOOD
(without Arms)

(standard size)

Standard size, Rear legs made out from 3″x1 ¼”, size wood. Front legs 2″x2″. Three sides rule of size 1″x1″. Back rails 3″x1″ and with double superior cane and spirit polished. 292/-
10. CHAIR HARD WOOD
(with Arms)

(standard size)

Standard size with arms 1 ½”x1 ½”. Other specifications as per Sr. No. 9. 325/-
11. UNIVERISTY CHAIR
(standard size)
Standard size. Made of Hardwood with one arm on right hand made of wooden plank of size 9″x1/4″, having curve on inner side resting on front right legs.  Other specifications as per Sr. No.9. 440/-
12. EASY CHAIR(Hard wood)
(standard size)
Standard size Arms 2 ¼”.  Legs round/square of size 2″. Side all 2 ½”x1″. Double canned seat & back. Spirit polished.  400/-
13. LIBRARY TABLE
72″x48″x30″

(1829x1219x762mm)
Frame made of kikar wood. Legs 3″x3″. Upper rail 3 ½”x1¼”. Sunmica top fixed on 18mm commercial Board with beading of size ¾”x2″ spirit polished. 1310/-
14. SOFA SET(3pcs) with
Arms
Frame  made of hard wood. Seat cushion 4″. Back cushion 3″, covered with good quality rexin/taperstry. 5″ spring for seat & 3″ spring for back to be used. Visible wooden portion to be nicely polished. 3000/-
15.(a) SOFA SET (5 SEATED)
(standard size)
(Patti Wala Design)
Skeleton type, frame made of Hard wood, 3 seater on piece and one seater 2 piece. 4″ cushion for seat & 3″ cushion for back.  Covered with tapestry open wooden parts should be nicely polished. 6570/-
15.(b) SOFA SET (5 SEATED) Frame made of hard wood, 3 seater one piece & one seater two pcs. 4″ cushioned seat, 3″ cushioned back, covered with velvet/Raxion/Tapestory cloth. 5650/-
15.(c) SOFA 2 SEATER
Sketeton type
(One Piece)
Frame made of hard wood, 4″ cushion in the seat, 3″ cushion in ht back, covered with good quality.  Velvet/Rexion/Tapestory. 3450/-
16. CENTRE TABLE (wooden)
48″x24″x18″

(1219x610x457mm)
Frame  made of hard wood. One shelf made of wooden strips 1 ½”x1/2″. Sunmica top fixed on 18mm commercial Board with beading. Spirit polished. 1000/-
17. CENTRE TABLE (wooden)
36″x18″x18″

(914x610x457mm)
Specifications
as per Sr. No. 17.
650/-
18.(a) STUDENT TABLE
24″x18″x30″

(610x457x762mm)

Frame made of hard wood. Soft wood top of (Kail/Partal) ¾” thickness, spirit polished. 550/-
18.(b) LECTURE STAND
48″X30″X24″

(1219X762X610MM)
Made of Kail/Hard wood. One covered Book shelf at a distance of 6″ from front top. Size of legs. 2″x2″. Top of shelf made of 12mm thickness.  All sides open & spirit polished.  972/-
18.(c) LECTURE STAND
48″X30″X24″

(1219X762X610MM)
Sunmica fixed on 18mm commercial board with beading for top. Other specification same as per Sr.No. 18(b). 1188/-
19. LECTURE STAND
48″X24″X24″

(1219X610X610MM)
Made
Kail/ Hard wood. One covered Book shelf at a distance 6″ from top. Size of legs 2″x2″.  Top shelf made of 12mm thickness, 3 sides covered with 6mm commercial  ply. Spirit polished.  
1250/-
20. NEWS PAPER STAND
60″X36″X24″

(1524X914X610MM)
Frame of Kail wood. Two top size 3’x2′ (made of 18mm Commercial Board) with beading. Two legs 4″x2″. Two base support inter connected of size 4″x2″ for legs. Spirit polished. 795/-
21. TOWEL STAND
36″X36″X18″

(914X914X457MM)

Frame made of Hard wood of 3″x1″ with two nos. wooden rod of 1″ diameter. Spirit polished. 270/-
22. SCREEN 6’X6′
(Each Part 2’x6′)

(1829x610mm)

Made of Assam teak wood. Comprising of 3 parts. Tapestry cloth fixed on aluminium rod of  ¾” diameter.  Frame size 2 ½x1″ spirit polished. 850/-
23. BLACK BOARD(without
stand)

(48″x30″x7/8″)

1219x762x22mm

Made of Hard wood. Frame of 1″x1″. Having two Now. Hooks. Painted with black paint on both sides. 400/-
24. BLACK BOARD

(60″x60″x7/8″)

1524x762x22mm

Specification as per Sr. No. 24. 450/-
25. BLACK BOARD STAND

Height 6′ (1829mm)
Frame made of hard wood of size 3″x1″ with three legs attached with hinges. Spirit polished. 265/-
26. PEON BENCH(without back)
72″x15″x18″

(1829x381x457mm)
Made of hard wood. Frame size 3″x1″. Legs 2″x2″ plank seat thickness 12mm. Spirit polished. 389/-
27. PEON BENCH(with back)
72″x15″x33″

(bench height 18″)

(1829x381x839mm)
Made of hard wood.  Three front leg of size 2″x2″x18″. Three back legs of size 2″x2″x33″.  Khurji size 3’x1′. Lower rail 2″x1″. Wooden strips of size 3″x1″ would be fixed at ¾” gap on seat & back frame. Bench seat & back frame to be made from 3″x1″ hard wood.  Spirit polished. 648/-
28. ATTENDANCE BOARD

60″X36″X3/4″

(1524X914X19MM)
Frame made of hard wood ¾” (19mm) thick with beading of 1 ½”x3/4″ duly painted/writing. 700/-
29. NOTICE BOARD

60″X36″X4″

(1524X914X100MM)
Frame made of Hard wood of size 2″x7/8″ with salotex board covered with green khaddar cloth, having locking arrangement. Spirit polished. 800/-
30. HONOURS BOARD

60″X36″X2″

(1524X914X50MM)
Frame made of Hard wood with teak wood beading of size 1 ½”x3/4″ spirit polished.  730/-
31. WOODEN TRAY

18″X12″X3″

Frame made of Hard wood of 12mm. Bottom of commercial ply 6mm. Spirit polished. 120/-
32. HARD BED (DEWAN)

72″X36″X18″

(1829X914X457MM)

Frame made of Hard wood. Legs size 2″x2″. Upper rail 4″x1 ¾”. Lower rail 1 ¾”x1″ (only widthwise) .Top of commercial ply of 12mm. thickness. Spirit polished.   907/-
33. HEIGHT MEASURING STAND

Height 7″
Base size 6 ½”x18″x18″, made of shisham wood with painted measuring scale. Height 7′. 285/-
34. FOOTREST

18″X12″X6″

(452X305X152MM)
Made of Hard wood. Top of 10mm & sides of 1″ thickness. Spriti polished. 100/-
35. WASTE PAPER BASKET

12″X12″X12″

(305X305X305MM)
Made of Hard wood. Square top 12″X12″, at bottom 8″x8″. Height 12″. Spirit polished. 145/-
36. CHILMCH STAND

21″x10″20″

(552x126x660mm)
Made of Hard wood with polish. 225/-
37. PEON STOOL

18″X12″X18″

(457X305X457MM)
Frame made of Hard wood. Seat 7/8″ thick. Legs 1 ¾”x1 ¼”. Upper rail 2 ½”x1″. Lower rail 1 ¾”x1″. Spirit polished.  130/-
38. WOODEN STOOL

18″X12″X28″

(457X305X711MM)
Wooden stool made of hard wood with top 18″x12″x3/4″ with total height of 28″. Hardwood legs of size 2″x2″. Upper & lower rail of size 2″x1″.  The stool should have proper joints and spirit polished. 200/-
39. LAB STOOL

24″x18″x12″

(610x457x305mm)
Frame made of hard wood. Legs 1 ¾”x1 ¾”. Upper rail 2 ¾”x1″ lower rail 1 ¼”x1″. Top thickness 7/8″. Spirit polished.   184/-
40.(a) WOODEN SIDE RACK

36″X10″X30″

(914X254X762MM)
Two shelves/three compartments. Legs 2″x2″ made of Hardwood. Shelves of size 36″x10″x1″. The side rack should be spirit polished. 510/-

PART-C: AGRICULTURE IMPLEMENTS

Sr.No. Name
of items
SPECIFICATIONS Rate
(Rs. Each)
1.(a) TASLA

(HRBP Sheet)

Made of 18/20G. (1.2mm/1.00mm) HRBP sheet as per size & requirement of the purchasing deptt. (rate by weight) 33/-P.K.g.
1.(b) TASLA

(G.P. Sheet)

As per Sr. No. 1, but of GP Sheet. 42/-P.Kg.
2. BUCKET Steel Bucket made of 24 G. (0.60mm) GP sheet (as per IS-726-1964).

a) 12″ (300mm)

b) 14″ (355mm)

130/-

150/-

3. SPADE Made of 10G.(3.15mm) HRBP Sheet. Handle made of Shisham wood 30″ (762mm)

a) 12″x12″x9″(385x385x299mm)

b) 12″x12″x10″(385x385x254mm)

103/-

113/-

4. KHURPA Made of Kamani of size 8″x4″. (204x100mm) fitted with handle of Shisham wood duly riveted (rate by weight without handle) but to be supplied with handle. 36 P.Kg.
5. PICK-AXE (Genti) As per requirement of the purchaser, fitted with handle of Shisham wood. Minimum weight 3.250 kg. (without handle) 130/-
6. BELCHA (Showell) Made of 12G. (2.50mm) HRBP Sheet, Fitted with handle of Shisham wood Minimum weight 1.75 kg. (without handle). 60/-
7. NAKKA PLATE Made of 10G. (3.15 mm) HRBP Sheet with 6mm Chain. Length of the Chain as per size of the plate (rate by weight) 30/-P.Kg.
8.(a) STEEL TRUNK Made of 24 G. (63mm) GP Sheet with support of sheet in cover. Iron Chain for additional supports on both sides. Handle on three sides, Kundi & Kabja of suitable sizes should be properly riveted.

i) 30″x10″x16″
(762x254x406mm)
ii) 35″x18″x16″
(889x457x406mm)
iii) 54″x30″x33″
(1137x762x838mm)
iv) 35″x24″x18″
(889x610x457mm)

 
520/-

625/-

150/-

750/-

8.(b) STEEL TRUNK /STEEL KIT
BOX

Size:24″x18″x16″

Made of 22G. GP sheet with support of sheet in cover and rest of the specification as per Sr. No. 8(a), with 4 Nos. Handle. 520/-
9.(a) SOAKING MORTAR TANK Made of 10G. (3.15mm) HRBP sheet with 25x25x3mm angle iron frame on all sides.  Two handles of 16mm dia. Leak proof electric welding. Weight and size as per requirements (rate by weight) 27/-P.Kg.
9.(b) WATER TANK (Round)

Seamiess leak proof
Height 2′, dia 10″, made of G.P. sheet 22G.(80mm) One water tap of brass of size ½”fitted with body.  Half top covered, half folding top fitted with 2 nos. hinges of size 2″ and 1 kunds of size 2″. 3Noa. Legs made of angle iron of size 7/8″ x 7/8″. Legs of height 6″ rivetted with body and painted. 425/-
9.(c) WATER STORAGE TANK

Seamiess leak proof
Tank to be made from 5mm thick best quality M.S. Plates, Fitted/welded with each other upto 450 liters capacity and below. M.S. Plates to be fixed to frame work consisting of 40x40x6mm angles by means of  drilling and revetting through proper size.  The minimum free board shall be 150mm above full supply level. Each tank to be provided with G.I. flanges as below:-

Overflow = 15mm to 20mm

Inlet & Outlet = 15mm to 20mm

Overflow = 25mm

Square pipe = 40 mm

Square pipe shall terminate into a socket and a plug. Overflow pipe shall be fitted with brass mosquito proof cap with 1.25 mm diameter preferably leak proof washer with fittings and flanges shall be provided. Inside of tanks shall be painted with 3 coats of approved black bitumastic stand coat paint, primer and outer side with red oxide and finished with 3 coats of bitumastic grey and any other shade paint as per building design.

Capacity/Rate

275ltr.29000/-

350 ltr.3700/-

450 ltr.3800/-

10. WATER STORAGE TANKI

48″x48″x24″

(1200x1200x600mm)

Made of 10G. (3.15mm) HRBP Sheet duly electric welded joints and painted complete with 16″(406mm) dia cover fitted with 1″x1/8″ (25×3.15mm) angle iron (rate by weight) of all sizes. 28/- P.Kg.
11. WHEEL BARROW Body made of 16G. (1.60mm) back sheet (HR/CR) Fitted with flat iron chassis 1 ½”x ¼”(38x6mm)9″ pipe iron handle, all electric welded joints.  Cast iron wheel fitted with 12″x2″(304x50mm) solid Rubber tyres. Capacity as under, minimum depth 18″.

a) 2.75 cft.
b) 3.50 cft.
c) 3.75 cft.
d) 4.50 cft.

1200/-

1350/-

1400/-

1450/-

12. WHEEL BARROW
CAPACITY

a) 75 Ltrs.(3.0 cft.)
b) 85 Ltrs.(3.4 cft.)
c) 110 Ltrs. (4.4 cft.)
d) 140 Ltrs.(5.6 cft.)

Body of steel sheet of 16G. Property welded at all joints with chassis. made of flat iron of size 30x6mm. The legs of the chassis shall be bent to form a bow and welded to the main frame.  Two Nos. flat iron of same size should be provided at the bottom of the body for central supports.

WHEEL

Cast iron wheel of size 12″x2″(304x50mm) fitted with solid rubber tyres on ball bearing having 25mm internal dia meter and 6mm each with bushes.  The angle should not be less than 25mm diameter and bearing length should be not less than 25mm at each end.  To clearance between Axie and bearing should not be more than 0.5 mm 

FINISH

The metal parts should be finished with two coats of black bituminous paints.

1250/-

1300/-

1350/-

1440/-

13.(a) WINDOW GRILLS
M.S. Grill as per customers design & specifications including fitting charges, holes with screw, Electric welded joints, (rate by weight)
25/- P.Kg.
13.(b) RAILINGS
Steel railling as per  customers specifications/duly primered (rate by weight)
26/- P.Kg.
14. FOUNTAIN BUCKET
Fountain Bucket leak proof. Made of 24G. GP sheet 10″ dia and 12″ over all height with handle 6 ¾”. Cover fitted with fountain (Jharna)
215/-
15. KASSI
Made of HR sheet 16G. Handle made of Shisham wood 2 ½’ Length.

a) 12″x12″x9″

b) 12″x12″x10″


100/-

100/-

16. TREE GUARD
Height 6′, dia 2′. Wiremesh 2mm thick of size

3″x2 ½” should be fixed 2′ above from bottom. 3 rings made of flat iron 20x3mm should be fixed around the Jali (one on the top, one on the bottom and one in the Middle) Three angle iron legs of size 20x20x3mm having length 6′ are to be fixed at equal distance.  One plate of 16g. size 4″x10″ is to be fixed with top ring.  Tree guard should painted with black paint.

24/- P.Kg.

News for locals

Celebration of Independence Day

Celebration of International Yoga Day

Celebration of Dr. B. R. Ambedkar Jayanti

Chaitra Navratare,2017

Digidhan Mela

Inauguration of Collage

Fire Safety Week

68th Republic Day Celebration at Parade ground Panchkula

Workshop on CM Window

Ushering of Digital Haryana Programme was organised at Inderdhanush Auditorium ,Panchkula Union Minister Ravi Shankar Prasad announced a number of projects for Haryana in the fields of communication and IT and postal services.